MIDEA MIST FAN (WATER) 16″ inches [FS40 – 13QR] with Midea FS40-13QR 16″ Mist Fan, sleep peacefully for longer without any sort of noise disturbance. The nozzles not only produces the same mist droplet size as expensive high pressure units but reduces energy consumption and can spray much finer droplets with the same energy usage.‎ The 3 fluid dynamics blade design, effectively reduce noise and increase air flow.

SPEED Fan level selecction control by speed+ and speed
TIMER Fan timer switch: it cycles in the sequence of 1h-2h-4h-8h-0-1h-.
MIST Humidification switch: For use, see the User’s Manual of Humidifier.
MODE Wind class selector switch: it cycles in the sequence of Normal wind - Natural wind - Sleep wind - Normal wind.
ION Anion switch: It works after the fan and humidifier are performed. ECO/TEMP Smart wind switch: It automatically selects an appropriate level according to the temperature change.
OSC Oscillation switch: It controls the left and right swinging.

Instructions on humidification function
· Remove the water tank from the host, and unscrew the water tank cap counter-clockwise.
· Fill the water tank with cold water, tighten the water tank cap and check for leakage.
· Put the water tank into the host according to the angle, and wait a few minutes until the host sink is filled with water.
· After the humidification button is pressed, the indicator lights up to start humidification.
· Note: If the indicator flashes (off after 10 seconds), it indicates insufficient water or low water level, please check whether the float in the sink of
the host has floated or the water tank is properly placed.